# Overview

You can put the relevant expression into a hidden value that represents the integer form of the value.

**Round a number down to the nearest integer**

If you want to round a number down you can use the int() function to cut off the decimal point (i.e. 2.2 -> 2; 2.7 -> 2)

int(#form/value)

**Round a number up to the nearest integer**

Use the following calculation to always round a number up (i.e. 2.2 -> 3; 2.7 -> 3)

If( int(#form/value) < #form/value, int(#form/value) + 1, int(#form/value))

This compares whether the decimal form of the lowest integer is smaller than the current value, and if so, rounds up, and otherwise truncates the value.

**Round a number up from .5, otherwise down**

As of CommCare 2.19, the "round" function is available. Simply write round(#form/value). Read more here.

You can also use the int() function in combination with multiplying the input by 2, adding 1, and then dividing by 2 (i.e. 2.2 -> 2; 2.7 -> 3)

int ( ( #form/value*2 +1 ) div 2 )

To round to a different number of decimal places, appropriately adjust the constant '2' in the preceding calculation. The constant should be twice the inverse of the desired precision. For example, for a precision of 0.1, constant = 1 / precision * 2 = 1 / 0.1 * 2 = 20. Consequently use int ( ( #form/value*20 +1 ) div 20 ).

**Round a number to a certain decimal place**

You can use the same principles to round to the nearest .1, .01, .001, etc. with the following formula:

Round to nearest decimal:

**round(#form/value*10) div 10**To round to two decimals change the 10's in the formula above to 100. To three decimals change them to 1000, etc.

Example:

round( 1.145 * 10 ) div 10 = 1.1

round( 1.145 * 100 ) div 100 = 1.15